The apparatus for determining the clay component model 01315M Лабораторное оборудование в Липецке - Промышленное оборудование на Epilot.ru 19.02.2021

The apparatus for determining the clay component model 01315M

100 ₽
The apparatus for determining the clay component model 01315M

The apparatus for determining the clay component model 01315M is designed to determine the clay component in accordance with GOST and for the preparation of suspensions and solutions in molding materials laboratories of foundries, central plant laboratories and research organizations.
Installation principle
In accordance with the method for determining the clay component by the accelerated method, a 20 gram sample is isolated from the mixture sample, placed in a glass, 300 cm3 of water is added and boiled for five minutes. Then the contents of the vessel are transferred to the glass of the apparatus and 200 cm3 of water is added. The glass with the test liquid is placed at the top of the rack in a special socket. In this case, the toggle switch is pressed and a microswitch is turned on, which does not allow the device to be turned on without a glass installed. The maximum stirring time is ten minutes, set using a time switch. After removing the glass and flushing the sand particles from the mixer with water, the apparatus is ready for the next test.
Components of the device
The device consists of a base with a stand. At the top of the rack is a platform with an electric motor, covered with a cover. The electric motor drives the shaft of the mixer with impellers, through which the liquid is mixed.

Липецк, Исполатова,1

Авторизация

Похожие объявления

  • 668 908.44 ₽
    5-осевая стоматологическая мельница Roland DWX-52DCi с автоматическим устройством смены дисков запечатана в заводской упаковке со всеми принадлежностями и программами, аутентична и имеет двухлетнюю га
  • 1 000 ₽
    ООО «Литмашприбор» производит следующий перечень приборов для лабораторий литейных цехов: - Определения зернового состава песка Модель 029, Модель 01412, Модель 026 - Машины для определения предела
  • 100 ₽
    The vibrating table is designed for compacting casting molds and cores made of sand-resin mixtures under conditions of serial and small-scale production The company "Litmashpribor" has the abilit
  • 100 ₽
    The vibrating table is designed to improve the fluidity of the molding mixture prepared by the cold-transferring technology
  • 100 ₽
    Double-arm mixer with a capacity of 3-10 t / h with a second arm 3 meters long